Expert Answers about Dutchmen Dutchmen Motorhome

• Axle Ground Clearance Needed For TrailerLegs Tire Saver Stands
• The TrailerLegs Tire Saver Stands - Tandem Axle # 326-TRLLG-4 have overall dimensions of 15" long x 8" wide x 19" tall. In order for the rubber to grip and allow lift your axles will need to be a minimum of 11-1/2 inches off the ground. The manufacturer recommends using some wheel blocks like # A10-0918 to increase the height of your axle from the ground if needed to assist in making this system work ideally if your axle height is less than the 11-1/2 inches.
  view full answer...


• Vent Lid Replacement for a 1995-1996 Dutchmen Pop-up Camper
• Most likely we have what you are looking for but you will need to first determine what vent style you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on...
  view full answer...


• How to Pick Out Awning Fabric for Awning on RV
• To pick out the correct awning fabric size you need to measure center of arm to center of arm on your awning and order that size. For example, the Replacement Awning Fabric for 10' Roller Assemblies # LCV000334335 is for 10' roller assemblies and works with Solera, A&E and Carefree of Colorado awnings. I've added a link to our selection of fabric for you to check out once you have the center of arm to center of arm measurement.
  view full answer...


• Replacement Circuit Board for Atwood Water Heater GCH6-7E
• The Replacement Control Panel part # AT91367 is correct for your Atwood Water Heater GCH6-7E whether it is in a motorhome or travel trailer.
  view full answer...